Infusion Pump Analyzer for Flow

The Seculife IF+ is designed to test the flow rates of intravenous infusion pumps to ensure their correct operation. It is able to test up to two pumps simultaneously.

All tests are controlled by a Microprocessor which calculates and displays the results. The fluid path is unobstructed, making them easy to clean. The tubes are plastic, not glass so they are rugged. The cables and chambers are interchangeable. The unit auto identifies each chamber when it is plugged in. The chamber calibration is stored electronically in each chamber, so all units are interchangeable. This unit is designed to be tough, simple, portable & very user friendly.

  • Easy to Use
  • Easy to Clean
  • Simultaneous Operation of T wo Chambers
  • Large Graphics Display with Cursor Selection of Options & Setup of Parameters
  • Auto Chamber Recognition
  • 2 Chamber Sizes (3.5 & 35 mL)
  • Out-of-Sequence Sensing
  • Battery Display (0 to 100%)
  • Ranges 0 to 999.9 mL/hr & 0 to 9999 mL/hr
  • ±1% of Reading Flow A ccuracy
  • Digital Calibration - No Pots to Turn
  • Replaceable Tubes
  • Sealed Level Sensors
  • Programmable End of Test Audio
  • Programmable Auto or Manual Test Start


  Article No: M695D
Icon Technical Data » GB (pdf 295 kB)
Icon Operating Instructions » GB (pdf 518 kB)
Icon Pamphlet » RU » PL
Short-form Operating Instructions (pdf 693 kB)
Quick Setup Guide (pdf 694 kB)
CE Certificate (pdf 27 kB)