Test Instrument for Testing Protective Measures in Electrical Medical Systems per IEC 60364.6 / DIN VDE 0100-600 / DIN VDE 0105-100
“In as far as it is reasonably feasible, every electrical system must be tested during setup and after installation has been completed, before it’s placed into service by the user.” Source: DIN VDE 0100-600
The new SECULIFE IP test instrument provides professional electricians with a state-of-the-art, universal measuring tool.
300 V 600 V
The instrument is capable of executing all measurements for testing the effectiveness of safety measures in electrical systems as required by IEC 60364-4 / VDE 0100-600, and as specified in the individual sections of EN61557 / VDE 0413. Consequently, it’s ideally suited for approvals and periodic testing of stationary electrical installations. With measuring category IV, the SECULIFE IP provides the user with maximum possible safety.
A broad-range measuring device permits use of the test instrument in all alternating and 3-phase electrical systems with voltages from 65 to 500 V and frequencies of 15.4 to 420 Hz.
Type comparison table