World-Map
 

Further Accessories

 - for SMARTCONTROL

Type  Designation  Article No.
Data transmission    
LON expansion set LON expansion card for subsequent installation in U200A, U200C or U200D Requirement: SMARTCONTROL basic PCB from rev. 2.3x onwards Z301V
IO24 expansion set IO24 expansion card for subsequent installation in U200A, U200C or U200E Requirement: SMARTCONTROL basic PCB from rev. 2.3x onwards Z301W
M-bus accessories    
PW 80 M-bus level converter socket module for 80 M-bus terminal devices, including touch protection, only for SMARTCONTROL Rev.3 Z301Y
Pulse transformer M-bus pulse transformer for converting 2 pulse signals to M-bus, can only be used in combination with M-bus level converter Z301K
Sensor accessories    
PT1000 
sleeve sensor
Temperature sensor, PT1000 sleeve sensor, measuring range: -50 to +180° C, 1.5 m silicon cable, V2A sleeve with 5.5 mm diameter. on request
PT1000 
room temperature
PT1000 temperature sensor for room temperature with housing on request
PT1000 
outdoor temperature
PT1000 temperature sensor for outdoor temperature with housing (IP 65) on request
PT1000 clip-on sensor   Temperature sensor, PT1000 clip-on sensor on request
Room humidity / temperature sensor Humidity and temperature sensor with 0 to 10 V or 4 to 20 mA output, working range for relative humidity: 0 to 99%, for temperature: 0 to +50° C, supply voltage: 15 to 35 V= on request
CO2 room sensor CO2 (carbon dioxide) sensor with 0 to 10 V output, non-dispersive infrared (NDIR) measuring method, measuring range: 0 to 2000 ppm, accuracy: +30 ppm, long-term drift (12 months): +10 ppm, supply voltage: 24 V AC/DC + 20%, power consumption: < 1 W on request
Misc. accessories    
Relay module Type 65AD, 5-fold relay module, RS 485 interface, ASCII protocol, 5 x SSR 1A /265 V on request
External power pack 100 ... 240 V AC / 24 V DC / 24 W Z301U

 

Products using Further Accessories as an accessory (display)